Publishing Portfolio

Anlässlich des 150. Geburtstags Thomas Manns im Jahr 2025 organisierten das TUM Center for Culture and Arts und das Thomas Mann-Forum München e. V. ein Gemeinschaftsprojekt unter dem Titel »Thomas Mann – In der Brandlandschaft der Demokratie. Leben. Politik. Gegenwart.« Ein Symposion, eine Ausstellung und ein vielfältiges Rahmenprogramm standen unter der Schirmherrschaft des Bundespräsidenten Frank-Walter Steinmeier. 

Der vorliegende Band vereint die Beiträge des Symposions »Militanter Humanismus. Thomas Manns Kampf um die Demokratie« und die Dokumente der Ausstellung. Die… more

This PhD thesis introduces methodologies for developing high-fidelity, tool-independent ray tracing-based RADAR and LiDAR sensor models for scenario-based testing. These models are created as functional mock-up units (FMUs) using the standardized open simulation interface (OSI) and functional mock-up interface (FMI), integrated into a co-simulation framework of commercial and open-source software, showcasing their performance and exchangeability without intellectual property (IP) infringement. The FMU models include the signal processing toolchain, address sensor imperfections, and… more

Single-cell oil (SCO) produced in biorefineries from oleaginous yeasts is an emerging sustainable alternative to mineral and plant-based oils. The unconventional yeast Cutaneotrichosporon oleaginosus has particularly drawn attention for its high SCO yields. In addition, C. oleaginosus can serve as a microbial cell factory for such value-added co-products. In the first part of this work, the potential of squalene production with C. oleaginosus – a high-value compound for the food, pharmaceutical and cosmetic industries – was investigated. The second part of this work focuses on tools for… more

Cosmic and solar radiation allow us to investigate myriad phenomena in astrophysics and heliophysics, and we can use them to study the surface composition of the Moon and other planets in the solar system. At the same time, mitigating the exposure of spacecraft and their crew to high-energy radiation is one of the greatest challenges of human spaceflight. This thesis presents the development of two instruments for studying cosmic and solar particles and the secondary radiation created by them. One is the RadMap Telescope, a radiation monitor designed for characterizing the environment… more

Determining the far-field radiation pattern of an antenna from measurements of its near field is a common task in the field of antenna characterization. Near-field measurements performed on-site are of great interest, as they can considerably extend the capabilities of traditional antenna characterization in anechoic chambers.

This thesis deals with the measurement and transformation of modulated electromagnetic fields that are recorded on-site with the help of uncrewed aerial vehicles. A corresponding near-field measurement setup is presented, measurements are examined and a… more

Zwischen Anspruch und Wirklichkeit der Energiewende klafft eine technische Lücke. Zwar bilden erneuerbare Energien das Rückgrat der Transformation, doch sie allein reichen nicht aus. Ohne ergänzende, grundlastfähige und treibhausgasarme Technologien bleiben zentrale Klimaziele außer Reichweite. Vor diesem Hintergrund rückt dieses Buch neuartige Kerntechnologien in den Fokus – als systemrelevante Ergänzung zur erneuerbaren Stromerzeugung. Es basiert auf einem internationalen Expertensymposium der TUM Senior Excellence Faculty und bietet einen faktenbasierten, technologieoffenen Blick auf… more

This dissertation analyzes the safety and efficiency issues in tower crane operations, indicating the wrong lifting timeline as the root cause. Then, it proposes an operation navigation system based on 4D BIM and AR, including 4D BIM-based lifting planning, AR for operation visualization, and AR for operation monitoring and hint. This new concept can provide the optimal lifting timeline for tower crane operation, improving two issues. Also, it can be applied to many valuable construction situations, such as modular construction, automatic tower crane, and infrastructure.

Additive manufacturing (AM) using laser powder bed fusion (PBF-LB/M) has many advantages such as design freedom and sustainability. However, AM also suffers from internal defects that limit its functionality. Furthermore, post-treatment methods like hot isostatic pressing (HIP) promise to enhance material properties. This work aims to develop a machine learning model using artificial neural networks, to predict PBF-LB/M or HIP process parameters based on quality characteristics.

Im Rahmen unseres Forschungsprojekts „Biodiversität ins Quartier“ wollen wir die Rolle von Gärtner*innen als “Hüter und Gestalter“ der biologischen Vielfalt unterstützen und Anregungen bieten, die biologische Vielfalt in der Stadt zu fördern.

Dieser Katalog mit verschiedenen wissenschaftlich gestützten und praxisorientierten Handlungsempfehlungen ist ein erstes Ergebnis der Zusammenarbeit aus Forschung und Praxis aus Gemeinschaftsgärten in München und Berlin.

Er ist als lebendes Dokument gedacht, das durch die Umsetzung und Bewertung der Maßnahmen fortgeschrieben und… more

Automatic, high-throughput single-cell analysis, a promising area in precision medicine and point-of-care testing, is the field that the CellFace group is currently exploring. This interdisciplinary project at the Technical University of Munich is dedicated to establishing digital, holographic flow cytometry as a label-free platform technology for cellular diagnostics. In doing so, it aims to advance the field and support clinicians in their decision-making in the future.
 

This book serves as an introduction to the CellFace ecosystem, its unique motivation, and the… more

This thesis focuses on model order reduction for non-linear magnetodynamic-mechanical systems. Using Maxwell's equations, a framework is established and validated with benchmarks. The study explores model order reduction and hyperreduction techniques, specifically DEIM and ECSW, evaluating them on academic and benchmark systems. Improvements to ECSW target non-linear domain areas and reduce post-processing costs. A practical use case with an active magnetic bearing demonstrates reduced-order models in monitoring scenarios, showcasing their potential to enhance simulation efficiency.

For most humans, bipedal walking is the natural mode of locomotion—so instinctive that it requires little conscious thought. Despite nearly 2,500 years of research, the biomechanics of human gait remains a complex puzzle. This book revisits and proposes several mechanisms of bipedal walking that have been subjects of scientific discussion for several decades. It explores gait stabilization, efficiency, and general dynamics. Readers will encounter surprising facts and a mechanistic explanation for the puzzling double-humped ground reaction force profile observed in human walking. The… more

Coda wave interferometry (CWI) is a novel non-destructive method for monitoring the integrity of concrete structures. It is highly sensitive to even weak material changes,  making it an effective early warning system for potential damage. By comparing two ultrasonic waveforms, CWI identifies velocity shifts in the late-arriving coda waves, particularly in heterogeneous media where scattering occurs.

This study analyzed the effects of temperature, humidity, and stress on coda wave velocity by means of the stretching method, identifying linear and non-linear relationships. Long-… more

Dieses Buch beleuchtet die Zukunft der „Grenzenlosen Unternehmung“ im Kontext von Digitalisierung, Wertewandel und neuen organisatorischen Lösungen. Zum 80. Geburtstag von Prof. Dr. Dr. h.c. Ralf Reichwald, einem Pionier auf dem Gebiet der Unternehmensführung im Informationszeitalter, knüpfen Forschende der deutschen Managementforschung, die aus der Schule Ralf Reichwalds hervorgegangen sind, an das wegweisende Werk „Die Grenzenlose Unternehmung“ von Reichwald, Picot und Wigand (1996) an und führen den Diskurs über die Auflösung von Unternehmensgrenzen in der digitalen Welt fort.… more

This research introduces tools for Materials Acceleration Platforms to enhance autonomous experimentation and predictive analysis tailored for battery technology. It integrates laboratory devices, multiple software, data analysis, and management systems and leverages machine learning and deep learning algorithms for AI-accelerated experimental optimization. The goal is to expedite knowledge extraction and increase the reliability and reproducibility of high-throughput experimental frameworks.

Diese Forschungsarbeit untersucht innovative Konzepte zur Schubverstärkung kleiner Turbojet-Triebwerke für unbemannte Luftfahrzeuge (UAVs). Im Fokus steht die Entwicklung einer Ejektordüse. Diese erzeugt nach dem Prinzip der Strahlpumpe ohne bewegliche Teile über die viskosen Kräfte zwischen der Abgasströmung und der Umgebungsluft einen sekundären Massenstrom. Die experimentelle und numerische Untersuchung zeigt, dass der Schub um bis zu 20% gesteigert und der spezifische Verbrauch gesenkt werden kann. Des Weiteren wird die Integration in das Luftfahrzeug durch die kühlende und… more

Die digitale Transformation kann als revolutionäre Umwälzung in allen Sektoren der Berufs- und Arbeitswelt und der Gesellschaft betrachtet werden. Solche Umwälzungen finden nicht nur technologisch statt. Vielmehr fordern sie unsere Alltagsvorstellungen und Begriffssysteme heraus. Im Lehrbuch wird die digitale Transformation der Berufs- und Arbeitswelt mit der Denkvorstellung der ‚Welt der Daten‘ adressiert. Zielgruppe sind Lehrkräfte in der beruflichen Bildung. Zielstellung des Lehrbuchs ist es, Ordnungskategorien für die Beschreibung der digitalen Transformation der Berufs- und… more

With foundations laid over the last six decades, digital computing is evolving towards heterogeneous, domain-specific, and hardware-programmable architectures. For real-time systems (RTSs) today, this enables powerful, yet highly complex hardware platforms like systems on a chip (SoCs). Besides reviving the aforementioned history and looking at future trends in two dedicated chapters, this book explores the intersection of RTSs and heterogeneous SoCs including a field-programmable gate array (FPGA), and tackles challenges in their interfacing, monitoring and optimization. Moving towards… more

For more than 50 years, the so-called field-oriented control is standard for controlled electric drive systems. However, due to the system characteristics, an arbitrary improvement of the controller properties is not possible. Predictive control methods that do not require cascade structures are an alternative. This trilingual book is the first to provide a clear and easy-to-understand introduction to the field of model-based predictive control in electric drives. Model-based predictive controllers, known from classical control engineering and applied with great success in process… more

Boundary integral equations for the analysis of scattering and radiation scenarios with reduced computational effort, increased reliability, and increased accuracy are discussed. The contributions consist of two parts: first, the simulation of scenarios involving perfectly conducting objects and second, the post-processing of measured radiated and scattered fields for near-field far-field transformations, involving settings with complex measurement data, echo suppression, and phase retrieval.